This document describes an attack on the keys for FlexLM itself.
papers
Not Assigned
30 July 1999
by Nolan Blender
Courtesy of Reverser's page of reverse engineering
fra_00xx
98xxxx
Nolan Blender
0100
NA
PC
A very well written and competent essay. Unix reversers will enjoy it a lot. I suggest to all readers to read and understand the Question and answers part of this essay. Ach ja: red oranges from Sicily or from Israel (spanish oranges are a no-no-no) and it's more or less a tea-spoon of honey, Nolan, that goes into the Traitor. Serve chill. :-)
There is a crack, a crack in everything That's how the light gets in
Rating
( )Beginner (X)Intermediate ( )Advanced ( )Expert


This document describes some of the algorithms used within FlexLM to generate the license keys, and more importantly the process used to analyze this algorithm. Although the entire reversing is not described, sufficient information to significantly assist the student is provided, and the rest is left as an exercise to the reader.
This document describes an attack on the keys for FlexLM itself.

Written by Nolan Blender


Introduction

FlexLM, or the Flexible License Manager, is a licensing product that is a descendant of the original Highland License Manager. This product is sold to organizations or individuals that wish to restrict or meter usage of their software products, and who don't wish to write their own licensing code.

A problem is the requirements for a mass release product conflict with the requirement of being resistant to cracking.
Consider: The product must have a clearly defined public interface, and the interface must be robust and easy to understand and use. Reverse engineering individuals will have a clearly defined set of inputs to the license server code, and a clear understanding of what the returned values mean.
The product must be as defect free as possible, and be easily ported to other platforms. The code must be understood, so that product defects can be corrected quickly and easily. The code in key subroutines appear to be reasonably small, highly modular, generally perform only one task, and only interact with other modules through parameters and return values. The downside of this is the modules are more easily analyzed if there are few parameters, the number of data types is small, and there aren't any globals or assembly modules.

Support on the product must be as minimal as possible. According to the metrics that we have, over half of the real man hours spent on a product are on support. Successful reverse engineering of FlexLM does not affect Globetrotter to any significant degree - their customers have already purchased the software, and most of the money derived from the product comes from maintenance contracts. Piracy costs, or for that matter, perceived piracy costs will be borne almost entirely by the vendor who uses FlexLM in their product.

When a software product is cracked, the crack usually isn't communicated back to the vendor. When a software defect is located that prevents paying end customers on maintenance from using the software, the problem is communicated back to the software vendor. The vendor will concentrate on fixing bugs or adding requested features rather than hunting down a problem that isn't preventing users from working.

The project was tested under HP-UX 10.20. Although the debuggers are different for other platforms, the techniques in this project should work for the unix platforms supported by Globetrotter.

Tools required
An ANSI C compiler.
A debugger. (DDE on HP-UX will do nicely)
Your basic HP-UX 10.20 machine with ANSI compiler.
The FlexLM development kit for your platform (See siulflex.htm)

Target's URL/FTP
ftp://ftp.globes.com

Program History
Originally the Highland License Manager, this software was one of the original floating license managers. It competed against NetLS, hwever NetLS required the Network Computing Service (NCS) to be running, which reqired system administration personel capable of understanding glbd and llbd. The Highland sofware was acquired by Globetrotter, who had the savvy to make a product which was easy to install and maintain, not to mention capable of supporting most licensing models and product structures that marketing can think of. Today the company has an easy to install, stable, supportable, multiplatform floating licensing product that is implemented in an insecure manner.

Essay

There are several tasks which we need to look at in order to reverse this product. Locating the relevant routines, then modifying the code so that we can intercept the calls or replace them will make the reversing task easier. It is helpful if you have read the excellent articles by Pilgrim and SiuL+Hacky.

The first task is to examine the construction of the conveniently supplied key generator. By looking at the makefile we can see

CLIENTLIB   = liblmgr.a
and later
makekey:    $(SRCDIR)/makekey.c $(SRCDIR)/lm_code.h \
                $(SRCDIR)/lmclient.h $(CLIENTLIB)
    $(CC) $(CFLAGS) $(SRCDIR)/makekey.c
    $(CC) -o makekey makekey.o $(CLIENTLIB) $(XTRALIB)
    rm makekey.o

All the components that are required to build the key generator are in liblmgr.a.

The next step is to extract the objects from this library, and locate the object which has the routine we are particularly interested in. In this case, we are interested in a routine called l_svk. In this instance, we are not as interested in the value it returns, VENDORCODE5, as the method which it arrives at this value.

ndceh024 [77]% mkdir extract
0.0u 0.0s 0:01 3%
ndceh024 [78]% cd extract
ndceh024 [79]% cp ../liblmgr.a .
0.0u 0.1s 0:01 11%
ndceh024 [80]% ar x liblmgr.a
0.0u 0.4s 0:02 22%
ndceh024 [81]% foreach i ( *.o )
? echo $i
? nm $i | grep l_svk
? end

From this process, we find that l_svk is in lm_ckout.o. The next step is to extract this file from the archived library file, delete the object lm_ckout.o from the archive, and build the executable from the remainder of the library and the object file. The nm tool is one which extracts information about entry points and variables from an object.

ndceh024 [83]% ar x liblmgr.a lm_ckout.o
ndceh024 [84]% ar d liblmgr.a lm_ckout.o
Then the makefile is modified thusly:
makekey:    $(SRCDIR)/makekey.c $(SRCDIR)/lm_code.h \
                $(SRCDIR)/lmclient.h $(CLIENTLIB)
    $(CC) $(CFLAGS) $(SRCDIR)/makekey.c
    $(CC) -o makekey makekey.o lm_ckout.o $(CLIENTLIB)
$(XTRALIB)
    rm makekey.o
The critical item is the addition of lm_ckout.o to the object build line.

Build the executable by typing make makekey. At this point, some of the other executables won't build because lm_ckout is missing from the archive. Check to make sure makekey builds without errors though.

As an exercise, we are going to add code to makekey to utilize the l_svk call.

In the main code, declare an unsigned long variable, and then add something like this just before the lc_init call:

    vcode = l_svk(VENDOR_NAME,&site_code);
    printf ("VENDORCODE5: %08x\n", vcode);
Verify that the value received is indeed vendorcode5 by running the program.
ndceh024 [98]% ./makekey
VENDORCODE5: aefa9027
Now it's time to add the mechanism for intercepting the call to l_svk. The way this will be done is to change the name of l_svk to something else, and then add a routine that will reroute the call to the renamed routine.

We change all occurrences of l_svk to l_nbk in that file. You can use your favorite binary editor to do this, or write your own.

ndceh024 [105]% mv lm_ckout.o lm_ckout.save.o
0.0u 0.0s 0:00 2%
ndceh024 [106]% ./repstr l_svk l_nbk lm_ckout.save.o
lm_ckout.o
0.2u 0.0s 0:01 18%
Of course building now will fail.
ndceh024 [110]% make makekey
        cc -c -g -I../machind -DHP -DHP700 -Aa
-D_HIUX_SOURCE
-D_HPUX_SOURCE +DA1.0 +DS1.0 ../machind/makekey.c
        cc -o makekey makekey.o lm_ckout.o liblmgr.a
/usr/ccs/bin/ld: Unsatisfied symbols:
   l_svk (code)
*** Error exit code 1

We now add a source file nb_patch.c to the build rule for makekey. nb_patch.o is first added to the list of objects, and the build rule for makekey changed to include the required object. The count of arguments is determined by examining the arguments loaded into the register before the call. We can pass too many arguments without problems but if we try and dereference them a memory access violation occurs. There is some reverse engineer required still.

makekey:    $(SRCDIR)/makekey.c $(SRCDIR)/lm_code.h \
                $(SRCDIR)/lmclient.h nb_patch.o
$(CLIENTLIB)
    $(CC) $(CFLAGS) $(SRCDIR)/makekey.c
    $(CC) -o makekey makekey.o lm_ckout.o nb_patch.o
$(CLIENTLIB)
$(XTRALIB)
    rm makekey.o
Now the program runs, and with the nb_patch.o object linked against makekey, we get the following.
ndceh024 [145]% ./makekey
l_svk() vendorname: blenderd
l_svk() ptr[0]: 00040000
l_svk() ptr[1]: 00cd2176
l_svk() ptr[2]: c124e9be
l_svk() ptr[3]: c450f9f4
l_svk() ptr[4]: 4d12be88
l_svk() ptr[5]: f52bcf4d
l_svk() ptr[6]: 3309994c
l_svk() retval: aefa9027
VENDORCODE5: aefa9027
The true value of this technique becomes apparent once we choose other routines to examine.
ndceh024 [165]% ar x liblmgr.a l_key.o
0.0u 0.0s 0:00 6%
ndceh024 [166]% ar d liblmgr.a l_key.o
0.0u 0.2s 0:00 26%
ndceh024 [167]% mv l_key.o l_key.sav.o
0.0u 0.0s 0:00 3%
ndceh024 [168]% ./repstr l_key l_nby l_key.sav.o
l_key.o
Of course, we have to modify the patch file to include a patch for this one too.
ndceh024 [257]% ./makekey
l_svk() vendorname: blenderd
l_svk() ptr[0]: 00040000
l_svk() ptr[1]: 00cd2176
l_svk() ptr[2]: c124e9be
l_svk() ptr[3]: c450f9f4
l_svk() ptr[4]: 4d12be88
l_svk() ptr[5]: f52bcf4d
l_svk() ptr[6]: 3309994c
l_key() vendorname: blenderd
l_key() ptr[0]: c450f9f4
l_key() ptr[1]: 4d12be88
l_key() ptr[2]: f52bcf4d
l_key() ptr[3]: 3309994c
l_key() retptr: 40006b90
l_key() retptr[0]: bffffffe
l_key() retptr[1]: ffffffe2
l_key() retptr[2]: ffffffff
l_key() retptr[3]: 03eea001
l_svk() retval: aefa9027
As it turns out, the output of l_key is the unencrypted data enabling various platforms and features. A001 is the expiry date. l_key calls many other functions, many of which satisfy (x==F(F(x))). Once this routine has been completely reverse engineered, an inverse algorithm can be easily created without having to go through the effort of reverse engineering the actual inverse function used in their code.

The process of sequentially examining functions and replacing them with stubs can greatly speed up the reverse engineering process. Lower level functions such as l_hbs() can be replaced with our own code, and the replacement code verified one module at a time. Once the code has been rewritten, a full understanding of the FlexLM vendor key generation and a full vendor key generator will be had.

It should be noted that the data returned by l_key() must pass certain checksum procedures, however reversing this procedure is not difficult. If you are satisfied with the features provided by this mask, the provided data will be sufficient. If we decode other vendor keys, the data provides a glimpse as to what the software vendor purchased.

I am providing these keys for your experiments. To the best of my knowledge, DAEMON blenderd has never been issued by Globetrotter, so the licenses generated by these keys won't unlock anything already issued.

#define ENCRYPTION_SEED1 0xae37b151
#define ENCRYPTION_SEED2 0x6fde7999
version 6 sdk keys to be placed in lm_code.h
VENDOR_NAME blenderd
VENDOR_KEY1 0xc450f9f4
VENDOR_KEY2 0x4d12be88
VENDOR_KEY3 0xf52bcf4d
VENDOR_KEY4 0x3309994c
VENDOR_KEY5 0xaefa9027
version 5 sdk keys to be placed in lm_code.h
VENDOR_NAME blenderd
VENDOR_KEY1 0x6a7bdad3
VENDOR_KEY2 0x15450f8a
VENDOR_KEY3 0x058a5891
VENDOR_KEY4 0x26f97f61
VENDOR_KEY5 0xaefa9027
Here is the final nb_patch.c code.
#include<stdio.h&gt

unsigned long *l_nby(char *vendorname, unsigned long *ptr);

unsigned long l_svk (char *vendorname, unsigned long *ptr) {
  unsigned long  retval;
  int i;
  printf ("l_svk() vendorname: %s\n", vendorname);
  for (i = 0; i < 7; i++)
   printf ("l_svk() ptr[%d]: %08x\n", i, ptr[i]);

  /* Now call the original routine */
  retval = l_nbk(vendorname, ptr);
  printf ("l_svk() retval: %08x\n", retval);
  return(retval);
}
/*
 * code after this point must be commented out for the first part of the
 * exercise, as l_key will be a duplicate symbol until the original is
 * renamed.
 */

unsigned long *l_key(char *vendorname, unsigned long *ptr){
  unsigned long  *retptr;
  int i;
  printf ("l_key() vendorname: %s\n", vendorname);
  for (i = 0; i < 4; i++)
   printf ("l_key() ptr[%d]: %08x\n", i, ptr[i]);

  /* Now call the original routine */
  retptr = l_nby(vendorname, ptr);
  printf ("l_key() retptr: %08x\n", retptr);
  for (i = 0; i < 4; i++)
   printf ("l_key() retptr[%d]: %08x\n", i, retptr[i]);
  return(retptr);
}
Code to replace a string with another one. This is provided for those who don't have a binary editor on the unix platform they are using.

#include<stdio.h>
#include<string.h>

#define BUF_SIZ 4096

typedef struct buf_s {
 char buf[BUF_SIZ];
 int buf_start;
 int buf_len;
} buf_t;
int buf_add(buf_t *bptr, int inchar);
int buf_replace(buf_t *bptr, char *instr, char *replace_str);

void main(int argc,char *argv[])
{
 int c;
 int i;
 int worklen;
 FILE *infile, *outfile;
 buf_t mybuf;

 infile = stdin;
 outfile = stdout;
 if (argc > 5 || argc < 3) {
  fprintf(stderr, "Usage: repstr str_to_replace replacement_str [infile [outfile]]\n");
  exit(1);
 }
 if (strlen(argv[1]) != strlen(argv[2])) {
  fprintf (stderr, "str_to_replace and replacement_str must be same length.\n");
  fprintf (stderr, "This is for modifying binary files.\n");
  exit(1);
 }

 if (argc == 4 || argc == 5) {
  if ((infile = fopen(argv[3], "r")) == NULL) {
   fprintf(stderr, "Failed on read open of %s\n", argv[3]);
   perror("fopen");
   exit(2);
  }
 }
 if (argc == 5) {
  if ((outfile = fopen(argv[4], "w")) == NULL) {
   fprintf(stderr, "Failed on write open of %s\n", argv[4]);
   perror("fopen");
   exit(2);
  }
 }
 mybuf.buf_start = 0;
 mybuf.buf_len = 0;
 worklen = strlen(argv[1]);

 while ((c=getc(infile)) != EOF) {
  buf_add(&mybuf, c);
  if (mybuf.buf_len >= worklen) {
   buf_replace(&mybuf, argv[1], argv[2]);
   putc(mybuf.buf[mybuf.buf_start], outfile);
   mybuf.buf_start += 1;
   mybuf.buf_len -= 1;
  }
 }
 for (i = 0; i < mybuf.buf_len; i++) {
  putc(mybuf.buf[mybuf.buf_start+i], outfile);
 }

 if (infile != stdin) {
  fclose(infile);
 }
 if (outfile != stdout) {
  fclose(outfile);
 }
 exit(0);
}

/*
 * buf_add:  add an entry
 */
int buf_add(buf_t *bptr, int inchar)
{
 int addpos;
 int i;
 char *p;

 addpos = bptr->buf_start + bptr->buf_len;
 if (addpos < BUF_SIZ) { /* still OK */
  bptr->buf[addpos] = (char) inchar;
  bptr->buf_len += 1;
 }
 else { /* need to move values to start of buffer */
  p = bptr->buf;
  for (i = 0; i < bptr->buf_len; i++) {
   *p++=bptr->buf[bptr->buf_start+i];
  }
  bptr->buf_start = 0;
  addpos = bptr->buf_start + bptr->buf_len;
  bptr->buf[addpos] = (char) inchar;
  bptr->buf_len += 1;
 }
 return(0);
}

/*
 * buf_replace
 */
int buf_replace(buf_t *bptr, char *instr, char
*replace_str)
{
 int i;
 int replen;

 replen = strlen(instr);

 if (strncmp(&(bptr->buf[bptr->buf_start]), instr, replen) == 0) {
  for (i = 0; i < replen; i++) {
   bptr->buf[bptr->buf_start + i] = replace_str[i];
  }
 }
 return(0);
}


Final Notes
FlexLM as it is distributed provides a degree of protection from unauthorized use of software, however it is not sufficient to prevent cracking of products licensed through FlexLM. The degree of protection it provides is probably sufficient to keep typical commercial users from using unlicensed software. Concerned vendors should consider using the vendor string to encode additional information so generic attacks on FlexLM will not comprimise their product.

I would especially like to thank Wally for making FlexLM available, and paying for multiplatform support and maintenence on this product out of his cost centre.

Questions, some answers only obtained by reversing:

1. a) What method does Globetrotter use to ensure old vendor codes won't work on newer versions of the FlexLM SDK?
b) How can the information for newer versions be recovered?

2. What methods can be used to prevent a generic crack of FlexLM from compromising a given vendor's software?

3. How are dates encoded by the FlexLM software?

4. What value indicates no expiry?

Exercises:

1. Build a key generator that will generate valid FlexLM vendor keys for all known versions of FlexLM.

2. Determine the meaning of the bits in the unencrypted data, and build a key generator which can make keys that have certain platforms disabled and expire on a given date.

Answers:

1. A checksum routine is seeded with different values for different versions of the software. The seed can be recovered by passing a null string into the routine.

2. Either use vendor defined encryption or use additional checking via the VENDOR_STRING. This won't prevent dedicated crackers from reversing the product, however a generic crack for FlexLM won't be enough to crack the product.

3.

char *montharr[12] = {"JAN", "FEB", "MAR", "APR", "MAY", "JUN",
                      "JUL", "AUG", "SEP", "OCT", "NOV", "DEC"};

int l_interpret_date ( unsigned long intime, char
*outday)
{
 unsigned long sday;
 unsigned long smonth;
 unsigned long syear;

 sday = intime & 0x0000001f;
 smonth = (intime >> 5) & 0x0000000f;
 syear = (intime >> 9) & 0x0000007f;
 if (smonth > 11) {
  return(-1);
 }
 sprintf(outday,"%d-%s-%d", sday, montharr[smonth],
syear+1900);
 return(0);
}
4. A001

Ob Duh
I wont even bother explaining you that you should BUY this target program if you intend to use it for a longer period than the allowed one. Should you want to STEAL this software instead, you don't need to crack its protection scheme at all: you'll find it on most Warez sites, complete and already regged, farewell, don't come back.

You are deep inside reverser's page of reverse engineering, choose your way out:


redhomepage redlinks redsearch_forms red+ORC redhow to protect redacademy database
redreality cracking redhow to search redjavascript wars
redtools redanonymity academy redcocktails redantismut CGI-scripts redmail_reverser
redIs reverse engineering legal?